Kichler Spyn Lite handleiding
Handleiding
Je bekijkt pagina 8 van 57
KICHLER.COM8
HANGING THE FAN
To properly install your ceiling fan, follow the steps below.
Step 1. Before attaching fan to outlet box (not included), ensure the
outlet box is securely fastened to at least two points to a structural
ceiling member (a loose box will cause the fan to wobble). Pass the
120 volt supply wires from the ceiling outlet box through the center
of the ceiling mounting bracket. Install mounting bracket to outlet
box in ceiling using the screws and washers included with the outlet
box. (Fig. 5)
Step 2. Remove the retaining clip and hitch pin from the downrod
assembly. Remove the hanger ball from the downrod assembly by
loosening the set screw on the hanger ball (do not remove),
unscrewing and removing the cross pin, and unscrewing the hanger
ball (counterclockwise) from the downrod. (Fig. 6)
NOTE: Make sure to keep removed hardware separate to avoid
confusion during installation.
Step 3. Loosen the two set screws (do not remove) on the motor
coupling. (Fig. 7)
Fig. 5
Fig. 6
Fig. 7
Hanger Ball
Set Screw
Cross Pin
Retaining Clip
Downrod
Hitch Pin
REMEMBER to turn o the power before you begin
installation. This is necessary for your safety .
CAUTION: To avoid possible electrical shock, be sure
you have turned o the power at the main circuit panel.
Outlet Box
Ceiling Mounting Bracket
Flat Washer (included with outlet box)
Screw (included with outlet box)
Set Screw
Set Screw
Set Screw
Motor Coupling
Bekijk gratis de handleiding van Kichler Spyn Lite, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Spyn Lite |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4203 MB |
