Kichler Spyn Lite handleiding
Handleiding
Je bekijkt pagina 14 van 57
KICHLER.COM14
INSTALLING THE SWITCH COVER (CONTINUED)
INSTALLING THE SWITCH HOUSING
Fig. 19
Fig. 20
Mounting Plate Screw
Switch Cover
Mounting Plate
Mounting Screws
Switch Cover
Step 1. Remove the three preinstalled mounting screws from the outside
edge of the switch cover. Retain mounting screws. (Fig. 20)
CAUTION: Before continuing installation, confirm that the power is still
turned o at the main circuit breaker or by removing the circuit fuse.
Turning the power o using a wall switch is not sucient to prevent
electrical shock.
Step 2. Place the key hole slots in the switch cover over the 2 mounting
plate screws that were loosened on the mounting plate. Rotate the switch
cover (clockwise) until it locks in place against the mounting plate screws
at the narrow ends of the key hole slots.
Align the remaining hole in the switch cover with the remaining hole in the
mounting plate. Install the mounting plate screw that was removed from
the mounting plate into the aligned holes. Tighten all 3 mounting plate
screws to secure the switch cover in place. (Fig.19)
Bekijk gratis de handleiding van Kichler Spyn Lite, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Spyn Lite |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4203 MB |
