Kichler Pillar handleiding

Ventilator

Kichler

60 pagina's

PDF beschikbaar

Handleiding

12 | KICHLER.COM

INSTALLING THE SWITCH HOUSING

Step 1. Step 1. Remove the screw marked with a dot label which preinstalled on Remove the screw marked with a dot label which preinstalled on

mounting plate and keep for later use. Loosen the other two (do not remove). mounting plate and keep for later use. Loosen the other two (do not remove).

Place the two slot holes on the switch housing over the 2 screws previously Place the two slot holes on the switch housing over the 2 screws previously

loosened from the mounting plate. Rotate the switch housing until it locks in loosened from the mounting plate. Rotate the switch housing until it locks in

place at the narrow end of the key holes. Secure by tightening the 2 screws place at the narrow end of the key holes. Secure by tightening the 2 screws

previously loosened and the one previously removed. (Fig. 20)previously loosened and the one previously removed. (Fig. 20)

Fig. 20

Mounting Plate

Switch Housing

Screw

Bekijk gratis de handleiding van Kichler Pillar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.