Kichler Pillar handleiding

Ventilator

Kichler

60 pagina's

PDF beschikbaar

Handleiding

52" Pillar LED | 11

ATTACHING THE FAN BLADES

NOTE: NOTE: Before continuing, make sure the power is disconnected by turning Before continuing, make sure the power is disconnected by turning

o the circuit breaker or removing the fuse at the circuit box.o the circuit breaker or removing the fuse at the circuit box.

Step 1. Step 1. Attach the blade holder décor to the blade holder using screws from Attach the blade holder décor to the blade holder using screws from

the hardware package. (Fig. 17)the hardware package. (Fig. 17)

Step 2. Step 2. Attach the blade to the blade holder using screws and washers from Attach the blade to the blade holder using screws and washers from

the hardware package. (Fig. 18)the hardware package. (Fig. 18)

Step 3. Step 3. Place the blade assembly to the motor, tighten the two “pre-installed” Place the blade assembly to the motor, tighten the two “pre-installed”

screws in the blade holder. (Fig. 19)screws in the blade holder. (Fig. 19)

Fig. 17

Fig. 18

Fig. 19

Blade Holder Décor

Screw

Blade Holder

Blade

Bekijk gratis de handleiding van Kichler Pillar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.