Kichler Lucian handleiding
Handleiding
Je bekijkt pagina 8 van 48
HANGING THE FAN (continued)
Step 8. Slip the coupling cover , canopy cover and canopy onto the downrod.
(Fig. 9)
Thread the hanger ball onto the downrod, insert the cross pin through the
downrod and tighten. Now tighten the set screw. (Fig. 9)
Step 9. Lift the motor assembly into position and place the hanger ball into
the ceiling mounting bracket.
Rotate the entire assembly until the “Check Tab” has dropped into the
“Registration Slot” and seats firmly. (Fig. 10)
The entire motor assembly should not rotate (left or right) when seated
properly.
WARNING: Failure to reattach the cross pin and seat the “Check Tab” can
cause the fan to fall from the ceiling during operation. Take special care to
make sure this pin is reattached.
Fig. 9
Fig. 10
Canopy
Coupling Cover
Downrod
Canopy Cover
Set Screws
Hitch Pin
Retaining
Clip
Registration
Slot
8 | KICHLER.COM
Bekijk gratis de handleiding van Kichler Lucian, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Lucian |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3596 MB |
