Kichler Lucian handleiding
Handleiding
Je bekijkt pagina 7 van 48
HANGING THE FAN
(continued)
WARNING: All set screws must be checked, and retightened where
necessary, before installation.
Step 5. Remove the hanger ball from the downrod assembly by loosening the
set screw, unscrewing and removing removing the cross pin and unscrewing
the ball o the rod. (Fig. 7)
Step 6. Loosen the two set screws and remove the hitch pin and retaining clip
from the coupling on top of the motor assembly. (Fig. 8)
Step 7. Carefully feed the electrical lead wires and safety cable from the fan
up through the downrod. Thread the downrod into the coupling until the
Hitch pin holes are aligned.
Next, replace the hitch pin and retaining clip. Tighten both set screws. (Fig. 8)
Fig. 7
Fig. 8
Cross Pin
Hanger
Ball
Set Screw
Download
Supply Wires
Downrod
Set Screws
Set Screws
Hitch Pin
Retaining Clip
42", 52" and 60" Lucian II | 7
Bekijk gratis de handleiding van Kichler Lucian, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Lucian |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3596 MB |
