Kichler Humble handleiding
Handleiding
Je bekijkt pagina 10 van 66
10 | KICHLER.COM
HANGING THE FAN (CONTINUED)
Step 8. Slip the coupling cover, canopy cover and canopy onto the downrod. (Fig.
11)
Thread the hanger ball onto the downrod, insert the cross pin through the
downrod and tighten. Tighten the set screw.
Step 9. Lift the motor assembly into position and place the hanger ball into the
ceiling mounting bracket.
Step 10. Tighten three set screws on coupling cover firmly (Fig. 12)
Rotate the entire assembly until the check tab has dropped into the registration
slot and seats firmly. (Fig. 13)
The entire motor assembly should not rotate (left or right) when seated properly.
WARNING: Failure to reattach the cross pin and seat the check tab can cause
the fan to fall from the ceiling during operation. Take special care to make sure
this pin is reattached.
Fig. 9 Fig. 10 Fig. 13
Fig. 12
Fig. 11
Cross Pin
Hanger Ball
Downrod
Set Screw
Supply Wire
& Safety Cable
Downrod
Set Screws
Hitch Pin Coupling
Set Screws
Retaining Clip
Registration Slot
Downrod
Ceiling Canopy
Coupling Cover
Canopy Cover
Ball
Screws
Coupling
Downrod
Supply Wire & Safety Cable
Hanger Ball
Cross Pin
Set Screws
Canopy
Canopy Cover
Coupling Cover
Bekijk gratis de handleiding van Kichler Humble, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Humble |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4363 MB |
