Kichler Basics Pro Select handleiding
Handleiding
Je bekijkt pagina 14 van 60
Fig. 16
14 | KICHLER.COM
INSTALLING THE LIGHT KIT
NOTE: Before staring the installation, disconnect the power by turning off the
circuit breaker or removing the fuse at fuse box.
Step 1. Loosen the 3 screws from the switch housing.
Step 2. Raise and hold the light kit close to the switch housing. Snap
together the wire connection plugs (Fig. 16).
Step 3. Carefully push all wires back into the switch housing, then install the
light kit assembly onto the mounting ring with 3 screws provided. Be sure
to tighten all screws (Fig. 16).
Pull chain
Screws
Pull chain
Connection plugs
Light kit
assembly
Mounting ring
Bekijk gratis de handleiding van Kichler Basics Pro Select, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kichler |
| Model | Basics Pro Select |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4727 MB |
