Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 60 van 68
60
NOTE:
If PureBeam or Natural Ion Tech function is active, Natural Ion Tech led lights up like dimming
during door is open.
Menu Settings
Press Auto Door button(6) for 3 seconds to enter menu. Water hardness setting (e.g. SL3) is seen first. Press
Delay buttons(4) to surf through menu. Then, press Half Load button(5) to enter to the levels of the setting
you want to change in the menu. At this time display(3) blinks and that means this setting can be changed
by pressing Delay buttons(4). Set the new level with Delay buttons(4) and press Half Load button(5) to
save new level. After that display(3) will light up constantly and that means this setting level is saved.
You can change another setting with these steps or exit from menu by pressing Auto Door button(6) for 3
seconds or turning off/on.
No Setting Options Description
1 Water Hardness
SL1
Set the water hardness.
SL2
SL3*
SL4
SL5
SL6
2 Rinse Aid
r:1
Set the amount of rinse aid.
r:2
r:3
r:4*
r:5
3 Buzzer Sound Control
b:0
Set the buzzer sound level.
b:1
b:2
b:3*
4 Start Programme
LP0*
Set a default prog- ramme for when
the appliance switched on.
LP1
5 Tablet
A:0*
Set the Tablet option.
A:1
6 Save Power Mode
SP0
Set the Save Power Mode.SP1*
SP2
7 Factory Setting
FS0*
Restore changed settings to the
factory settings
FS1
*Default setting
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
