Kernau KDI 4753 SAD handleiding
Handleiding
Je bekijkt pagina 59 van 68
59
Cancelling a Programme
Follow the steps below if you would like to cancel a programme while in operation. Open the door of your
machine. The selected programme will appear on the display. Press and hold the Start/Pause button(9) for
3 seconds. “0:01” will be shown on the display. After closing the door of the machine, the water discharge
process will start and continue for 30 seconds. When the programme is cancelled, buzzer will sound 5 times.
Switching the Machine O
“0” will be shown on the display when the selected programme is complete. Buzzer will also sound 5 times.
You can then switch your machine off using the Power On/Off button. Disconnect the plug and turn off
the water tap.
NOTE:
Do not open the door before the programme is complete.
NOTE:
If the door of the machine is opened or the power is cut off while a programme is in operation,
the programme will continue when the door is closed or the power returns.
NOTE:
If the power is cut off during the drying process, the programme will terminate. Your machine
will be ready for a new programme selection.
Natural Ion Tech (Model Dependent)
This function provides extra hygiene to the machine thanks to Ion Technology. It operates as an independent
program. This function is activated by pressing Extra Fast button(7) for 3 seconds in ready state. At the end
of 3 seconds, “Ion” will be displayed which indicates that Natural Ion Tech function is activated. The button
is released after “Ion” is displayed. If there is no intervention by user, 24 hours after activation of Natural
Ion Tech function, it is automatically cancelled.
NOTE:
If machine is turned off, Natural Ion Tech function is cancelled.
NOTE:
Natural Ion Tech function does not work with any program.
UV(PureBeam & PureBeam+) (Model Dependent)
This technology which have Ion and Light Technology together, provides to extra hygiene. It prevents bad
odor during a washing program that includes a drying step. PureBeam function is activated or deactivated
before starting program in ready state by pressing Silent button (8) for 3 seconds. Meanwhile display counts
from 3 to 1.
NOTE:
If user do not deactivate PureBeam function at the end of program, it will remain active until
the machine turns off.
Bekijk gratis de handleiding van Kernau KDI 4753 SAD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kernau |
| Model | KDI 4753 SAD |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8636 MB |
