Kern OBN 135 handleiding
Handleiding
Je bekijkt pagina 18 van 47
18 OBN-13-BA-e-2511
8.6 Operation and function of the microscope
When the microscope is ready for use after assembly, it must first be connected to the
mains via the mains cable. Only insert the mains plug into a suitable socket. Ensure
that the mains cable is laid correctly.
The following sections describe all the important functions that are useful for operating
the device.
The first thing to do is to connect the power supply using the mains plug. The light
intensity control (dimmer) should first be set to a low level so that the eyes are not
immediately exposed to too much light when looking into the eyepieces for the first
time. The lighting can now be switched on using the main switch.
The next step is to place a slide with a sample on the stage. The cover glass must be
facing upwards for this. The object holder can be used to fix the slide on the stage (see
illustration on the left). To move the sample into the beam path, the adjustment wheels
on the right-hand side of the mechanical stage must be operated accordingly (see
illustration on the right).
A total of two slides can be placed at the same time.
Bekijk gratis de handleiding van Kern OBN 135, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kern |
| Model | OBN 135 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6939 MB |
