Handleiding
Je bekijkt pagina 42 van 173
42
LP Gas Conversion:
Conversion must be performed by a qualified service technician. The qualified agency
performing this work assumes the gas conversion responsibility.
No attempt shall be made to convert the appliance from the gas specified on the
model/serial rating plate for use with a different gas without consulting the serving gas
supplier. See "GAS CONVERSION" section.
GAS SUPPLY LINE
Provide a gas supply line of 3/4" (1.9 cm) rigid pipe to the range location. A smaller size pipe
on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the
action of LP gas must be used. With LP gas, piping or tubing size can be 1/2" (1.3 cm)
minimum. Usually, LP gas suppliers determine the size and materials used in the system.
Flexible metal appliance connector:
• If local codes permit, a new CSA design-certified, 4 - 5 ft (122 - 152.4 cm) long, 1/2" (1.3
cm) or 3/4" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting
range to the gas supply line.
• A 1/2" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of
the inlet to the appliance pressure regulator.
• Do not kink or damage the flexible metal tubing when moving the range.
Rigid pipe connection:
The rigid pipe connection requires a combination of pipe fittings to obtain an in-line
connection to the range. The rigid pipe must be level with the range connection. All strains
must be removed from the supply and fuel lines so range will be level and in line.
Bekijk gratis de handleiding van Kenmore 76833, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Kenmore |
| Model | 76833 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 19808 MB |
