Karcher FCV 4 handleiding
Handleiding
Je bekijkt pagina 21 van 234
English 21
Note
The device cannot continue to work until the fault has
been corrected.
Fault Cause Rectification
The device does not
work
The battery is empty. 1. Connect the charging and cleaning station
to the power supply and put the device
back to the charging and cleaning station.
The device is in the upright position. 1. Step on the floor nozzle and pull the upper
body towards yourself.
2. Press the mode switch button, and ad
just
to
the "stair mode".
The dirty water tank is full or missing. 1. Remove the dirty water tank and empty it
(see Emptying the dirty water tank).
2. Make sure the dirty water tank is installed
properly.
The roller or suction tube is blocked. 1. Remove the floor nozzle cover.
2. Remove the hair or large and/or bulky ob-
jects on the cleaning roller.
3. Remove the cleaning roller and clean the
suction tube (see Cleaning the floor noz-
zle).
Suction power decreas-
es
The filter is blocked. 1. Clean the flat pleated filter and sponge fil-
ter (see Cleaning the dirty water tank).
The suction tube is blocked. 1. Clean the suction inlet and suction tube in-
side the floor nozzle (see Cleaning the floor
nozzle).
The roller is dry after
turning on the device
The fresh water tank is empty or missing. 1. Refill the fresh water tank.
2. Make sure the fresh water tank is installed
properly.
The roller needs time to be moistened. 1. Keep running the device for a while.
The current mode is dry mode. Under dry
mode, no water is sprayed on the roller.
1. Press the mode switch button to change
the mode to Auto / Power / Stair mode.
Water comes out from
the air outlet
The device was laid down or shaken se-
verely.
1. Take the flat pleated filter and sponge filter
out and dry them completely.
The filters were washed and installed
without drying.
1. Take the flat pleated filter and sponge filter
out and dry them completely.
Self-cleaning is not
working
Dirty water tank is full or missing. 1. Remove the dirty water tank and empty it
(see Emptying the dirty water tank).
2. Make sure the dirty water tank is installed
properly.
The roller or suction tube is blocked. 1. Remove the floor nozzle cover.
2. Remove the hair or large and/or bulky ob-
jects on the cleaning roller.
3. Remove the cleaning roller and clean the
suction tube (see Cleaning the floor noz-
zle).
The device and the charging and clean-
ing station are in bad connection. Or the
charging and cleaning station is not con-
nected to the power supply.
1. Make sure the charging and cleaning sta-
tion is turned on.
2. Make sure the device is paced on the
charging and cleaning station properly.
The charging level is less than 20%,
which is not enough for self-cleaning.
1. Wait for the battery percentage to exceed
20% and press the self-cleaning button
again.
The battery can’t be
charged on the station
The device and the charging and clean-
ing station are in bad connection. Or the
charging and cleaning station is not con-
nected to the power supply.
1. Make sure the charging and cleaning sta-
tion is powered on.
2. Make sure the device is paced on the
charging and cleaning station properly.
Charging is too slow The battery temperature is too high. 1. Remove the device from the charging and
cleaning station.
2. Wait for the battery to cool down and
charge again.
Bekijk gratis de handleiding van Karcher FCV 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Karcher |
| Model | FCV 4 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 41006 MB |
