Karcher Chariot 3 iExtract 26 DUO Handleiding (170 Pagina's)

Handleiding

29

Use a 36 volt, 20 amp maximum output DC charger

which will automatically shut off when the batteries are

fully charged.

1. Stop the machine in a clean, well ventilated area

next to the charger.

2. Turn “OFF” machine.

FOR SAFETY: Before leaving or servicing machine;

stop on level surface, turn off machine and remove

key.

3. Open rear cover, unplug batteries from machine,

unlatch battery tray and pull out to expose

batteries.

Batteries emit hydrogen gas. Explosion or fire can

result. Keep sparks and open flame away. Keep

covers open when charging.

4. Check the electrolyte level in each battery cell.

Before charging, add just enough distilled water to

cover the plates. After charging is complete, add

just enough distilled water to bring up the level to

the indicator ring. If the water level is too high

before charging, normal expansion rate of the elec-

trolyte may cause an overflow resulting in a loss of

battery acid balance and damage the machine.

5. Replace the battery caps, and leave them in place

while charging.

FOR SAFETY: When charging, connect the charger

to the batteries before connecting the charger to

the AC wall outlet. Never connect the charger to the

AC wall outlet first. Hazardous sparks may result.

6. Plug the charger connector into the battery

connector. Connect the charger AC plug to a wall

outlet. The charger gauge should indicate that the

batteries are charging.

7. When the batteries are fully charged, disconnect

the charger from the AC wall outlet, then discon-

nect the charger from the batteries.

8. Connect the batteries to the machine connector.

9. Check the electrolyte level. It should be up to the

indicator ring. If necessary, add distilled water.

10. Close the rear cover.

86446700 Operator Manual - Chariot 3 - iExtract 26 Duo

Bekijk gratis de handleiding van Karcher Chariot 3 iExtract 26 DUO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.