Handleiding
Je bekijkt pagina 31 van 48
31
Put the upper chimney into lower chimney. Then pull out the upper chimney upwards. Adjust to reach the height
required.
Hook plate I and plate II onto chimneys(as shown in Pic1), mark position for the holes of plate I and plate II on the wall
with a pencil.
Remove chimneys and plates from cooker hood, and put them aside.
Drill 4×8mm holes to accommodate plate I and plate II, punch wall plugs into the holes, fix and tighten plate I and
plate II onto wall with 4 screws(4*30mm).
Put chimneys back onto cooker hood, slide the upper chimney upward to the appropriate height and hook it onto
plate I.
Hook lower chimney onto plate II(as shown in Pic1)
Optional:
Fix the upper chimney onto plate I with 2 screws(3*10mm) through 2 holes at both side(as shown in Pic2).
This step is optional, if you think upper chimney is well fixed by hooking onto plate I only, then no need this step.
Note:
Upper chimney can be fixed onto plate I by hook and screws. Lower chimney can be fixed by hook only.
Exhaust pipe
One-way-valve
Bekijk gratis de handleiding van K&H TSB-90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | K&H |
| Model | TSB-90 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 7722 MB |