Handleiding
Je bekijkt pagina 30 van 48
30
3. Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation of the
appliance when air is discharged from the room.
Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten the bracket onto the wall with the screws &
screw plugs provided.
Hang the cooker hood onto the wall bracket, remove the grease filters, mark position for 2 holes on the back of
cooker hood. Then, remove the cooker hood aside.
Drill 2×8mm holes on the wall based on the marked position, punch wall plugs into the holes, hang the cooker hood
back onto the bracket, fix and tighten the hood onto wall by 2 screws through the backside holes.
Ba
Replace the grease filters on the hood.
Fix the one-way-valve to the air outlet of the cooker hood. Then, attach the exhaust pipe onto the one-way-valve as
shown below.
Backside holes
Screw plug
Wall bracket
Screw (ST4×30mm)
Holes on wall
Bekijk gratis de handleiding van K&H TSB-90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | K&H |
| Model | TSB-90 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 7722 MB |