Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 91 van 140
7.1 Programming – manual
Activating the bus line rectier
To activate the programming mode
at the bus line rectier, the program-
ming mode button has to be briey
pressed down. LED1 indicates
whether the programming mode
is switched on. After activating the
programming mode, LED1 changes
over from normal mode to program-
ming mode.
Indication at LED1 Function display
LED ashes briey 0.02seconds – long pause 1second
Pause Pause Pause etc.
Using a small screwdriver, set the
bus line rectier to the programming
mode through the opening in the
cover.
Note:
If no programming process takes
place within 10minutes, the
BNG650-… switches back to the
standard operating mode.
Indication at LED1 Programming mode active
LED ashes briey 0.3seconds – long pause 2seconds
Pause Pause etc.
91
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
