Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 105 van 140
Dialling the door station
5 At the bus telephone, hold down
the button you wish to use to call
the door station for 4seconds.
Replace the receiver. The button is
now assigned to the door station.
The door loudspeaker can be dialled
at any time.
6 Replace the receiver. Continue to
program more bus telephones or
quit the programming mode.
You wish to be able to call one or
more door stations from a bus tele-
phone using buttons, e.g. in order to
selectively speak to a visitor.
This function can be programmed
for any bus telephone to any button.
The only exception is the door
release button.
2 At the door station, hold down
the light/programming button for
4seconds. A protracted acknowl-
edgement tone is then audible
which is repeated every 5seconds
as long as the programming mode
remains active.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
3 Lift the receiver at the bus tele-
phone which you wish to program.
4 Hold down the light button for
4seconds. A protracted acknowl-
edgement tone sounds in the
receiver, the muting button ashes.
A speech connection exists to the
door station. The bus telephone is
now in the programming mode.
Leave the receiver off the hook.
105
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
