Jung SITMA5073 handleiding
Handleiding
Je bekijkt pagina 100 van 140
7.1 Programming – manual
Door call to deluxe bus video panel
3 Press Settings; > Installation; >
Start programming; > Start. The
deluxe bus video panel establishes
the speech connection to the door
station. The deluxe bus video panel
is now in the programming mode.
At the bus video panel, a different
ringtone can optionally be selected
for the door call.
The volume of the door call can be
changed at the bus video panel.
2 At the door station, hold down
the light/programming button for
4seconds. A protracted acknowl-
edgement tone is then audible
which is repeated every 5seconds
as long as the programming mode
remains active.
1 Switch on the programming mode.
At the BNG/BVNG650-…, press the
programming mode button briey.
The LED1 ashes in a 2-second
rhythm to indicate that the program-
ming mode is active.
4 At the door station, hold down the
required call button for 4seconds
until a protracted tone sounds at the
door loudspeaker. The call button
is now assigned to the bus indoor
devices, no speech connection now
exists.
5 The call button is now rmly
assigned to the bus video panel.
Program additional users using the
same procedure or quit the pro-
gramming mode.
The basic conguration must be car-
ried out on every device without fail.
100
Bekijk gratis de handleiding van Jung SITMA5073, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | SITMA5073 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13662 MB |
