Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 52 van 94
Devices Connections Project Diagnosis
Create and edit rooms and areas Continue
+ New area / New oor
+ New room
Upstairs
Bedroom Children's room Bathroom
+ New room
+ New room
+ New room
Living room Kitchen Hallway
Garden Garage Terrace
Rooms without area assignment
Sensors Actuators
Wall transmitter
3-gang with
Labeling ...
Shutter
Jalousie button
with Radio receiver
Surface
Window
1
1
Door area
Living room
Window
Living room
The eNet server is the heart of the eNet SMART HOME system. It
forms the basis of a smart home and enables operation using the
eNet SMART HOME app – from the local network, and via the secured
remote access solution, eNet SMART HOME remote.
eNet SERVER
eNet SMART HOME connect – the
integrated, browser based commis-
sioning interface – is the instal-
lation engineer’s commission-
ing tool for the entire system.
Partner systems, e.g. the smart
Creating the building structure for commissioning
Connecting a wall transmitter to two different dimming actuators
1. eNet SMART HOME connect
COMMISSIONING INTERFACE
The eNet system is commissioned
using a PC and the eNet server. This
is done using eNet SMART HOME
connect, the browser-based soft-
ware application, which is already
included in the eNet server.
Once the PC and the eNet serv-
er have been connected to one
another, the application can
be started. To do this, either
“enetserver” or the IP address must
be entered into the web browser. The
eNet SMART HOME app can also be
used to determine the IP address.
No additional software is required.
The PC is either connected using
a network cable or wirelessly via
WLAN.
The next step is commissioning.
A project and a building structure
must first be created for this pur-
pose. Then, devices are added to
the project, either by performing a
device search or manually. These
devices are given unique names
depending on their application and
are functionally connected to one
another.
Finally, the configuration is wireless-
ly loaded into the devices. System
documentation can be automatically
created as a PDF document for the
system handover to the customer.
This documentation contains all the
details of the system in a clearly ar-
ranged format, so that future expan-
sions or changes in use can be easily
implemented.
heating system control from tado°
Professional, require an eNet
ser ver, but are directly connected to
the system via the eNet app and not
via the commissioning interface.
105104 eNet _ Server
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
