Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 44 van 94
Manual Frost protection Automatic
The “manual” setting
allows for the room
temperature to be
set by hand and for
specification of the
termination condition
which determines
when the system
switches back to
automatic operation.
The “frost protection”
setting prevents the
heating system from
dropping below +5°C,
which ensures that it
does not freeze.
At the same time, the
termination condition
determines when the
system switches back
to automatic mode.
The “automatic”
setting uses the
automatic tado°
functions. These
include the “smart
schedules” set in the
tado° app as well as
“location-dependent
control”.
tado° termination conditions
(Valid for the “manual” and “frost protection” operating modes):
For the period of … Until next automation Until ended by user
After a specified period
of time, the heating
system control
switches back to
automatic mode.
When the next “smart
schedule” time block
starts or the next
state of the “locati-
on-dependent control”
changes (come/go),
the heating system
control switches back
to automatic mode.
The operating mode
is not ended until a
user sets a different
operating mode.
Three control modes are available:
“manual”, “frost protection” and
“automatic”. In “automatic” mode
the heating system is controlled by
means of “smart schedules” (the
schedules in the tado° app) and
by means of “location-dependent
control”. The “frost protection” and
“manual” modes keep the heating
system at a constant temperature
for a specific period of time, defined
by means of a termination condi-
tion. The termination condition de-
scribes when the mode is to switch
back to automatic operation.
If “location-dependent control” is
ac tiv ated in the tado° app, the states
“tado° Home” and “tado° Away”
are available as triggers in the if-
then rules of the eNet app. When
people leave the “home zone”,
these rules can be used to turn
down the heating, lower the blinds
or switch off the lights in the house
all at the same time. As soon as
people return to the “home zone”, it
is possible to automatically switch
on the outside lights or open the
drapes, for example.
The automatic tado° functions
“smart schedules” and “location-
dependent control”
In the tado° app it is possible to
use so-called “smart schedules”
to define intelligent schedules for
every zone and every day of the
week so that every room is just the
right temperature all the time. In
order to ensure that there are no
conflicting double schedules, it is
not possible to add further heating
system control actions in the eNet
SMART HOME app. This is also on
account of the fact that the “smart
schedules” enable activation of the
control before the defined switch-
ing time so that the desired room
temperature is already reached
by that point in time. This function
is called “early start” in the tado°
app. Early action can be taken on
the basis of weather forecasts and
building characteristics can be
considered directly only by means
of the tado° schedules.
In the case of “location-dependent
control”, the tado° app uses the
location of the smartphones of the
users who have consented to this
function and determines on this ba-
sis whether the users are at home
or not. The states “tado° Home”
and “tado° Away” aren’t just used
for heating system control, but can
also be used for other functions via
if-then rules.
The functions “smart schedules”
and “location-dependent control”
can only be configured in the tado°
app.
8988 eNet_Heating
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
