Jung FMGCR1700 handleiding
Handleiding
Je bekijkt pagina 38 van 94
saves the first run-on time trans-
mitted by the motion detector, and
continues to use it whenever it is
triggered by a connected eNet wall
transmitter, for example. Each
time a wall transmitter is pressed,
it is processed by the staircase
lighting actuator as a trigger sig-
nal from the motion detector and
leads to the staircase lighting being
switched on or re-triggered. In this
situation, it does not matter which
of the two buttons of a connected
rocker is pressed. Because the ac-
tuator is not allowed to be switched
off in Sentinel mode, it reacts to all
switching commands equally. This
also has the advantage that in the
dark, there’s no need to press a
certain side of the button rocker to
switch the light on.
After 90 minutes at the latest, an
actuator in Sentinel mode switches
back off again – for a brief time at
least – and waits for the connected
motion detector to detect motion
again.
Activating a pre-warning function
To prevent people from possibly
going undetected in unfavourable
conditions and being surprised by
the lights automatically switching
off, the “Switch-off pre-warning”
parameter can be set in the actua-
tors in question. This activates a
pre-warning function. If the actua-
tors are dimming actuators, this
causes the lights to dim softly. If they
are switching actuators, the lights
flash briefly before being switched
of f. In both situ ations, the people rea-
lise that the lights will soon switch
off, and can ensure that the actuator
is re-triggered using the motion de-
tector or an additionally networked
wall transmitter. Potentially unsafe
situations in sudden darkness are
thus reliably avoided.
Integrating conventional motion
detectors
eNet motion detectors are power-
ful and can be put to highly versatile
use. If a building is to be retrofitted
with eNet, existing conventional
motion detectors can continue to
be used. To do this, an eNet univer-
sal transmitter must be connected
to the existing motion detector’s
switching output in order to inte-
grate it into the eNet system. eNet
actuators are then wirelessly con-
trolled in the building using motion
detectors.
Pre-warning function
7776 eNet _ Automatic light
Bekijk gratis de handleiding van Jung FMGCR1700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Jung |
| Model | FMGCR1700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24644 MB |
