Juice Goose CQ-3000 handleiding
Handleiding
Je bekijkt pagina 9 van 11
ADJUSTING SEQUENCE DELAY TIMING
There are three sequence events on the CQ1515 and CQ1520. (See also CQ1515-RX and CQ1520-RX). The
standard factory delay is 2 seconds between each sequence event. That timing can be adjusted. Note: Only the
CQ15xx models have field adjustable timing. Contact Juice Goose is a sequence delay adjustment is required
on any other CQ Series model.
Optional settings are 10 seconds, 20 seconds and 30 seconds. Changing the timing will only affect the product
to which the adjustment is made and will not change the timing of any other CQ Series products connected by
control lines.
Adjusting the delay time requires removing the top of the CQ15xx chassis and accessing a small “dip switch”
located on the main circuit board.
WARNING: Always ensure the unit is powered down and unplugged before attempting this procedure.
Step 1. Remove the chassis top
The chassis top is held in place by six screws (three at the top of each side). Remove all six and remove the top.
Leave the bottom screws in place.
Step 2. Locate the dip switch on the main board and move to desired position
Step 3. Replace the chassis top and test
Return the top to the main chassis and fasten securely with the six top assembly screws. Plug the unit in and
test the delay. If the delay is not as expected, repeat steps 1 through 3 and ensure the dip switches are fully
pushed into the correct positions.
Bekijk gratis de handleiding van Juice Goose CQ-3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Juice Goose |
| Model | CQ-3000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1435 MB |
