JMAZ Electro Panel W8 handleiding
Handleiding
Je bekijkt pagina 35 van 56
34
Standalone Setup:
Address:
To set the DMX Address on the Electro Panel W8, follow the instructions below:
Press Menu, or the Up and Down arrows repeatedly until Address shows on the display.
Press Enter
Use Up or Down to select the DMX Address between 1 to 512.
Press Enter once you’ve chosen your desired DMX Address
Channel:
To set the DMX Channel on the Electro Panel W8, follow the instructions below:
Press Menu, or the Up and Down arrows repeatedly until Channel shows on the display:
Press Enter
Use Up or Down to select your desired DMX Channel: HSV/HSI/3/4/6/11/16.
Press Enter once you’ve chosen your desired DMX Channel.
Preset Color-Mode:
To run the Electro Panel W8 on a Preset Static Color, follow the instructions below:
Press Menu, or the Up and Down arrows repeatedly until Color shows up on the Display.
Press Enter
Use Up or Down to select Preset Color from Color 1 to Color 73.
Press Enter once you’ve chosen your desired color.
CCT Mode:
To run the Electro Panel W8 on CCT Mode, follow the instructions below:
Press Menu, or the Up and Down arrows repeatedly until you see CCT on the Display.
Press Enter
Use Up or Down to select the CCT Color value between 2300K to 8500K.
Press Enter once you’ve chosen your desired color.
Favorite Custom Color Mixing:
To select between your 4 favorite color options, follow the instructions below:
Press Menu or the Up and Down arrows repeatedly until you see Favorite on the Display.
Press Enter
Use Up and Down to select between the 4 custom colors you should like to change:
● Favorite Custom 1
● Favorite Custom 2
● Favorite Custom 3
● Favorite Custom 4.
1. Press Enter
2. Use Up and Down to switch between Dimmer Brightness: 0-255.
3. Press Enter once you’ve chosen your desired value.
4. Use Up and Down to switch between Red Value: 0-255.
5. Press Enter once you’ve chosen your desired value.
6. Use Up and Down to switch between Green Value: 0-255.
7. Press Enter once you’ve chosen your desired value.
8. Use Up and Down to switch between Blue Value: 0-255.
9. Press Enter once you’ve chosen your desired value.
10. Use Up and Down to switch between Lime Value: 0-255.
11. Press Enter once you’ve chosen your desired value.
12. Repeat the above for Custom Color 2, 3, and 4.
13. Press Enter once you’ve finished your selections.
Bekijk gratis de handleiding van JMAZ Electro Panel W8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JMAZ |
| Model | Electro Panel W8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6905 MB |
