JMAZ Electro Panel W8 handleiding
Handleiding
Je bekijkt pagina 34 van 56
33
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication
between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the
controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA
“IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA
“OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of different manufacturers to be linked
together and operate from a single controller, if all fixtures and the controller are DMX compliant. To
ensure proper DMX data transmission, try to use the shortest cable path possible when linking several
DMX fixtures. The order in which fixtures are connected in a DMX line does not influence the DMX
addressing. For example, a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line:
at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1,
the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is in the
DMX chain.
How to Delete and Establish a New CRMX Wireless Connection:
Turning on CRMX Wireless DMX
1. Press the Menu Button until you see “Setting”, Press E to Enter.
2. Scroll via the Up and Down arrows until you see “Wireless” highlighted, Press E to Enter.
3. Scroll via the Up and Down arrows until you see “CRMX” highlighted, Press E to Enter.
4. Scroll via the Up and Down arrows until you see “ON” highlighted, Press E to Enter.
5. Now the CRMX Wireless DMX Function has been turned on.
Deleting Existing Connection:
1. Press the Menu Button until you see “Setting”, Press E to Enter.
2. Scroll via the Up and Down arrows until you see “Wireless” highlighted, Press E to Enter.
3. Scroll via the Up and Down arrows until you see “CRMX” highlighted, Press E to Enter.
4. Scroll via the Up and Down arrows until you see “ON” highlighted, Press E to Enter.
5. Press the Menu Button to go back one Menu, and scroll down via the Up and Down arrows until you
highlight “UnLink” Press E to Enter.
6. Scroll via the Up and Down arrows to cycle through the “NO” and “YES” options.
7. Selecting the “YES” option will delete any existing connections the fixture has via CRMX Wireless
DMX.
8. Now the fixture is ready to establish a CRMX Wireless DMX Connection.*
*Please follow the instructions on your CRMX Transmitter to establish a CRMX Connection to the
fixture.
Bekijk gratis de handleiding van JMAZ Electro Panel W8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JMAZ |
| Model | Electro Panel W8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6905 MB |
