JMAZ Centipede Quadro handleiding
Handleiding
Je bekijkt pagina 27 van 45
26
○ Click “ok” to go to the setting page.
○ The display will show Dim Curve.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to pick your desired dimming curve.
○ Click “Menu” button to exit the setting page.
● Tilt Invert
○ The display will show Tilt Invert.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select yes or no.
○ Use “Ok” to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Reverse Mapping
○ The display will show Reverse Mapping.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select yes or no.
○ Use “Ok” to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Reverse Head
○ The display will show Reverse Head.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select yes or no.
○ Use “Ok” to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Loss of Data
○ The display will show Loss of Data.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select close or hold.
○ Use “Ok” to confirm your selection.
○ Click “Menu” button to exit the setting page.
● PT Calibrate
○ The display will show PT Calibrate.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select yes or no.
○ Use “Ok” to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Backlight
○ The display will show Backlight.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select show, 60 seconds, or 30 seconds.
○ Use “Ok” button to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Display Flip
○ The display will show Display Flip.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select on or off.
○ Use “Ok” button to confirm your selection.
○ Click “Menu” button to exit the setting page.
● Frequency
○ The display will show Frequency.
○ Click “ok” button; a green up and down arrow sign will show up.
○ Use “Up” and “Down” button to select your desired frequency Hz.
○ Use “Ok” button to confirm your selection.
○ Click “Menu” button to exit the setting page.
Bekijk gratis de handleiding van JMAZ Centipede Quadro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JMAZ |
| Model | Centipede Quadro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5509 MB |
