JMAZ Centipede Quadro handleiding
Handleiding
Je bekijkt pagina 10 van 45
9
Damage: Do not attempt to operate the unit if it has been damaged in any way.
Avoid spilling water or other liquids onto the unit.
Connections: Disconnect from the main power before making any type of
connection.
Ventilation: Do not block any air ventilation slots. Ensure all fans and air inlets
remain clean and unobstructed. Maintain approximately 6 inches (15 cm) between
the fixture and other devices or walls for proper cooling. Mount the unit in an area
that allows proper ventilation.
Cover: Do not remove the cover for any reason.
Suspended Installation: When installing the fixture in a suspended environment,
always use mounting hardware of at least M10 x 25mm and install the fixture with
an appropriately rated safety cable.
Power Supply: Never plug the unit into a dimmer pack. Disconnect the main power
during long periods of non-use. Mount the unit safely and securely. Route power-
supply cords to prevent them from being walked on or pinched, especially at the
point where they exit the unit.
Cleaning: Clean the fixture only as recommended by the manufacturer.
Heat Sources: Keep the fixture away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
Servicing: The fixture should be serviced by qualified personnel if:
● The power-supply cord or plug is damaged.
● Objects have fallen onto or liquid has been spilled into the fixture.
● The fixture does not operate normally or shows a marked change in
performance.
● The fixture has fallen or been subjected to extreme handling.
Bekijk gratis de handleiding van JMAZ Centipede Quadro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JMAZ |
| Model | Centipede Quadro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5509 MB |
