JET Skyhyker SKY25 handleiding
Handleiding
Je bekijkt pagina 7 van 40
27. Use this material lift only on solid and level surfaces. Do
not use on inclines.
28. Always maintain your balance and rm footing when
operating the material lift.
29. Keep work area and material lift path clear of debris and
clutter.
30. When elevating the mast without a load, make sure you
let out enough load cable while raising the mast so the
headache ball does not jam into the mast T-bar pulley.
Continuing to raise the mast in this condition will damage
and bend the T-bar.
31. Always lower the mast to the lowest possible position
before moving the material lift to another location.
32. Do not use more than one material lift to raise or lower
a load.
33. When raising or lowering material, make sure there is
adequate clearance to overhead wires and other objects
and/or obstructions.
34. When moving the material lift, make sure there is ad-
equate clearance to overhead wires and other objects
and/or obstructions.
35. After lifting or lowering a load, secure the object. Do not
rely on the winch or lift to hold an object for an extended
period of time.
36. Do not operate material lift unless load is centered and
balanced.
37. Do not operate material lift in windy or gusty conditions.
38. Do not operate outdoors during storms or if lightning is
in the area.
39. Do not leave the material lift unattended with a load
attached and elevated.
40. Do not climb on the material lift or place a ladder or any
type of side load on the mast.
41. Do not move the material lift to different locations while a
load is attached. Have material at the lift location before
moving the material lift in place.
42. Do not move the material lift by pulling on the load line.
Only push or pull the lift according to the instructions in
this owner’s manual.
43. Always take time to study the job to be performed and
choose the safest method. Do not place yourself or other
people in an unsafe position.
Figure 2-1: Correct Cable Wind
44. Give your work undivided attention. Looking around,
carrying on a conversation and “horse-play” are careless
acts that can result in serious injury.
45. If welding near the material lift, do not allow the cable,
hook, or any part of the lift to be touched by a live elec-
trode. Prevent weld splatter from contacting the lift.
46. When the lift is not in use, you must place the load cable
hook securely into the hook bracket located on the mast.
Tighten the load winch cable to remove all slack.
47. Only use replacement parts and accessories approved
and provided by JET.
JET TOOLS • SKY25 SKYHYKER MATERIAL LIFT | 4
Bekijk gratis de handleiding van JET Skyhyker SKY25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | Skyhyker SKY25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16855 MB |
