JET Skyhyker SKY25 handleiding
Handleiding
Je bekijkt pagina 10 van 40
Your SkyHyker material lift is shipped complete. Separate all
parts from the packing material and check each item care-
fully. Report any damage immediately to your distributor and
shipping agent. Do not discard any shipping material until the
material lift is assembled and operating properly. Read this
entire instruction manual thoroughly for safety information
and assembly, operation, and maintenance instructions.
5 Unpacking
1 Base Assembly
1 Mast Assembly
1 Hardware package, includes:
For Guy Wires:
• guy wires
• threaded connecting links
• chains
• turnbuckles
For T-bar:
• axle with wheel spacers
• wheels
• hairclips
• extra shear pin
For Winches
• winch gear box breather plugs
• winch handles
General:
• owner’s manual
• product registration card
Figure 5-1: Unpacking
CHECK FOR MISSING PARTS: If any parts are miss-
ing, do not place the machine into service until the
missing parts are obtained and installed correctly.
5.1 CRATE CONTENTS
The mast and base assemblies are very heavy.
Unpack this machine on a stable and level surface.
Use caution when removing crate sides and sup-
port pieces. Use at least two people or a hoist to re-
move the base assembly from the crate. The mast
assembly will require a hoist or forklift to remove
from the crate. Attach the hoist or lifting strap to
the balanced travel mode lift point on winch side of
the mast. See Section 3 Product Identication for
travel mode lift point location.
7 | Chapter 5: Unpacking
Bekijk gratis de handleiding van JET Skyhyker SKY25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | Skyhyker SKY25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16855 MB |
