JET JWL-1221VS handleiding
Handleiding
Je bekijkt pagina 20 van 32
20
Bearings are permanently lubricated and sealed.
They do not require further lubrication.
12.2 Motor Brushes
Referring to Figure 28:
Periodically inspect the two carbon brushes located
at each side of the motor. If brushes need
replacing, replace both at the same time.
A heavily worn or damaged
brush, if allowed to remain, may eventually
cause damage to internal motor elements.
1. Disconnect lathe from power.
2. Unscrew cap (A, Figure 28) using a
screwdriver or coin, and withdraw brush.
3. Inspect brush. Replace brush if any of the
following are seen: Brush is worn 1/4" (6mm)
or more, collapsed spring, broken lead in
spring, abnormal discoloration, signs of
breakage, burning or crumbling.
4. Reinsert brush, or install new one, and screw
in cap.
5. Repeat inspection for brush on opposite side
of motor.
Figure 28
12.3 Belt replacement
Referring to Figures 29 through 32:
1. Disconnect lathe from power.
2. Release belt tension (see Figure 14), and
open pulley access doors.
3. Remove spur center and faceplate.
4. Engage spindle lock, and loosen both set
screws (A) in handwheel with 3mm hex key.
Unscrew handwheel from spindle. (Note: Left-
hand threads; turn clockwise to remove.)
5. Disengage spindle lock.
6. Loosen both setscrews (B) in spindle pulley.
7. Loosen setscrew in spindle sensor collar (C).
Figure 29
8. Remove three button head screws to loosen
cover (D, Figure 30). NOTE: When cover is
loosened, the spindle lock assembly (E) may
pop out with its spring. Be careful not to lose
these parts.
Figure 30
9. Use a rubber mallet, or hammer against a
block of wood, to tap spindle toward tailstock
(Figure 31). Note: The right side bearing will
slide out with the spindle.
Never use a steel face
hammer directly against the spindle.
Figure 31
10. Continue pulling spindle toward tailstock until it
clears left hole in headstock and offers enough
room to remove belt (Figure 32).
Bekijk gratis de handleiding van JET JWL-1221VS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | JWL-1221VS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6365 MB |
