JET JWJ-8HH-BLK handleiding
Handleiding
Je bekijkt pagina 5 van 28
5
into the cutterhead along with the operator’s
fingers.
30. Never back the workpiece toward the infeed
table.
31. Always keep cutterhead and guards in place
and in proper working order.
32. Always use hold-down/push blocks for jointing
material narrower than 3 inches, or thinner than
3 inches.
33. Maintain the proper relationships of infeed and
outfeed table surfaces and cutterhead knife
path.
34. Use proper extension cord. Make sure your
extension cord is in good condition. When using
an extension cord, be sure to use one heavy
enough to carry the current your product will
draw. An undersized cord will cause a drop in
line voltage resulting in loss of power and
overheating. Table 1 of Section 8.3 Extension
Cords shows correct size to use depending on
cord length and nameplate ampere rating. If in
doubt, use the next heavier gage. The smaller
the gage number, the heavier the cord.
35. Turn off the machine and disconnect from
power source before cleaning. Use a brush or
compressed air to remove chips or debris — do
not use your hands.
36. Do not stand on the machine. Serious injury
could occur if the machine tips over.
37. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
38. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
39. Do not use in dangerous environment. Don’t
use jointer in damp or wet locations or expose
to rain. Keep work area well lighted.
40. Allow machine to reach operating speed before
use.
41. Maintain tools with care. Keep knives sharp and
clean for the best and safest performance.
Follow instructions for lubricating and changing
accessories.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly even fatal,
injury.
SAVE THESE INSTRUCTIONS
4.0 About this Manual
This manual is provided by JET covering the safe operation and maintenance procedures for a JET Model JWJ-
8HH-BLK Jointer. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed
to provide consistent, long-term operation if used in accordance with instructions set forth in this manual. If there
are any questions or comments, please contact either your local supplier or JET. You can also reach us at our
web site: www.jettools.com.
Register your product using the mail-in card provided or register online:
www.jettools.com/product-registration
To quickly reach the product registration webpage, scan the QR code below.
Read and understand the entire contents of this manual before attempting assembly or
operation! Failure to comply may cause serious injury!
Bekijk gratis de handleiding van JET JWJ-8HH-BLK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JET |
| Model | JWJ-8HH-BLK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9382 MB |
