Handleiding
Je bekijkt pagina 10 van 24
10
EN
Figure 7: Strain relief on the side by default
However, optionally, if the installer wants the STRAIN RELIEF to be on the top panel of the backcan instead of on the side panel,
follow these instructions:
OPTIONAL: MOVING STRAIN RELIEF TO TOP PANEL
[Optional Steps for Moving Strain Relief to Top Panel]
There are two same-diameter holes in the terminal cover, one on the top panel and one on the side panel. From the factory, the
top hole is tted with a PRESS-IN PLUG and the side hole has the STRAIN RELIEF assembly. To swap them, open the terminal
cover and press out the PRESS-IN PLUG (retain it for later).
Figure 8: Push out the PRESS-IN PLUG
[Optional Steps for Moving Strain Relief to Top Panel]
From the inside of the TERMINAL COVER, unscrew the nut holding the STRAIN RELIEF.
Figure 9: Unscrew the NUT
[Optional Steps for Moving Strain Relief to Top Panel]
Insert the STRAIN RELIEF into the top hole of the TERMINAL COVER. Tighten the nut holding the STRAIN RELIEF assembly.
Bekijk gratis de handleiding van JBL Control 424C/T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | JBL |
| Model | Control 424C/T |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 3263 MB |
