Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 51 van 112
49
Fringe Designs
Fringe designs are special patterns for creating fringed
owers.
The embroidery design easily turns into an attractive
fringed ower.
Example:
Fringe Designs pattern #5
1.
Select the Fringe Designs pattern #5.
A message will appear to conrm the size of the
embroidery hoop.
Press the OK key.
(1) OK key
1.
Select the Fringe Designs pattern #5.
A message will appear to conrm the size of the
embroidery hoop.
Press the OK key to show the
Ready to Sew
Ready to Sew window.
(1) OK key
Alternative method for fringe designs
1.
2. 3. 4. 5.
1.
2. 3. 4. 5.
2.
Sew the pattern as you would sew a normal
embroidery design.
3.
Remove the fabric from the hoop.
4.
Cut the needle threads along the broken line at the
outer edge of the pattern as show.
5.
Rufe the threads to make the fringe.
2.
Sew the pattern as you would sew a normal
embroidery design.
3.
Remove the fabric from the hoop.
4.
Cut the
bobbin
threads along the broken line at the
outer edge of the pattern as shown.
When the bobbin threads are too narrow
(1)
(1)
5.
Pull the needle threads up and bring the loop ends to
the right side of the fabric to make the fringe.
NOTE:
When the bobbin threads are too narrow to see and
cut, choose the bobbin threads you can cut and
remove them (shown as dots).
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
