Janome Memory Craft 100E handleiding

112 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 43 van 112
41
In-The-Hoop Designs <Rattles>
You can make your own stuffed doll with the In-The-Hoop
Designs.
3 parts of rattles are available in this category.
(1) Stuffed doll
(2) Handle for rattle
(3) Rattle
Prepare fabric of your desired design and material.
Fabric 1 (front side of the doll)
Fabric 2 (rear side of the doll)
Fabric 3 (front side of the handle)
Fabric 4 (rear side of the handle)
Stabilizer (non-water-soluble)
Wad cotton
Plastic bell (2 cm or less)
Ribbon (Width: 0.5 cm, Length: 4 cm)
Example:
In-The-Hoop Designs <Rattles>#5+#6
Creating the doll
The stuffed doll can be combined with two types of
handles (pattern 6: circle type, pattern 7: stick type) to
make a rattle. Add bells as you like.
1.
Select #5. Press the OK key.
Conrm the hoop size in the
Ready to Sew
Ready to Sew window.
2.
Attach a stabilizer on the wrong side of the fabric 1.
Set the fabric in embroidery hoop (refer to pages
26-27). Attach the embroidery hoop on the
carriage (refer to page 28).
(1) Fabric 1
(2) Stabilizer
(1) (2) (3)
3.
Embroider the following parts: eyes, mouth, nose,
cheeks and cut-off line.
(3) Cut-off line
4.
If you want to attach the ribbon, baste it at this step
(refer to page 44).
2.
3.
4.
1.
(3)
NOTE:
Do not remove the fabric from the embroidery hoop
until the sewing project is completed.
NOTE:
The embroidery data for the stuffed doll includes
basting the ribbon before the end of the sewing so
that you can pass a ball chain through it.
If you use fabrics such as pile or boa, the shape will
come out nicely when you stuff cotton, resulting in
an adorable nish.
Pile fabrics and boa may fray when the stabilizer is
removed. It is recommended to use a soft stabilizer
of a light to medium fabric that is glued on one side
and does not need to be removed.
(1)
(2)

Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkJanome
ModelMemory Craft 100E
CategorieNaaimachine
TaalNederlands
Grootte24843 MB