Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 42 van 112
40
Starting to Sew Embroidery
1.
Select the desired pattern. A message will appear to
conrm the size of the embroidery hoop.
Press the OK key.
(1) OK key
2.
A message will appear to conrm the thread tension.
Adjust the thread tension as recommended in the
message. Press the X key. The
Ready to Sew
Ready to Sew window
will open.
(2) Thread tension dial
(3) X key
3.
Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
centerlines on the fabric.
(4) Jog keys
(5) Centerlines on the fabric
1.
2.
4.
Hook the needle thread to the thread cutter/holder,
then press the start/stop button (refer to page 28).
Sew 5 to 6 stitches and press the start/stop button to
stop the machine.
Cut the loose thread close to the beginning of the
starting point.
(6) Thread cutter/holder
(7) Start/stop button
(8) Loose thread hook to the thread holder
5.
Press the start/stop button to start sewing again.
The machine will stop (and trim the threads if auto
thread cutting is activated) automatically when the
rst color section is nished (refer to page 82).
Change the thread to the next color and sew the next
section.
(1)
(3)
(2)
Sewing results
The embroidery pattern is sewn against the centerlines
on the fabric as shown.
(5) Centerlines on the fabric
Retracting the carriage arm
Remove the hoop from the carriage after the project is
completed.
Press the home position key to return the carriage to
the home position. Retract the carriage arm (refer to
page 22).
(9) Home position key
(6)
(5)
(4)
4. 5.
(5)
(8)
(7)
3.
(9)
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
