Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 38 van 112
36
Hoop back key
Turn the handwheel toward you to raise the needle.
Press the hoop back key and the hoop back option
window will open.
(1) Hoop back key
Message appears when the home position key is
pressed. Press the OK key to move the carriage to the
home position.
Ready to Sew
Ready to Sew window will open.
Press one of the
keys (4) to move the
hoop so that the needle falls at the position indicated by
the arrow on the frame.
Ready to Sew
Ready to Sew window will open.
Press the
key (5) to move the hoop to the center.
Ready to
Ready to
Sew
Sew window will open.
Press the X key and the hoop back option window will
close.
(6) X key
(1)
(2) (5)(4)
(6)
(3)
(8)
(7)
NOTE:
If this key is pressed while the presser foot is lowered,
a message screen will appear. Raise the presser foot
lifter and press the hoop back key again.
Press the key (7) or start/stop button and the
message will be displayed.
Press the OK key to return the hoop to the original
position.
If the hoop is removed, attach the hoop after the carriage
moves to the original position.
(8) OK key
NOTE:
Before using the home position key, remove the
embroidery hoop.
(2) Home position key
(3) OK key
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
