Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 26 van 112
24
Stabilizers
To create the best quality embroidery, it is important to
use stabilizers.
In case the embroidery design pattern you are going
to sew is dense, attach layers of stabilizers or a thick
stabilizer on the back of the fabric for better sewing
results.
How to use:
Attach the stabilizer to the wrong side of the fabric.
You may need to use more than one layer.
For rm fabrics, you may place a thin sheet of paper
under the fabric.
The non-adhesive type should be used when
embroidering fabric which cannot be ironed or for
sections which are difcult to iron.
Cut the stabilizer larger than the embroidery hoop and
set it on the hoop so that the entire piece is fastened to
the hoop to prevent any looseness in the fabric.
Attaching the stabilizer
Place the wrong side of fabric and the glossy side of the
stabilizer together. Fold up a corner of the stabilizer and
fuse it with an iron.
(1)
S
tabilizer
(2)
C
orner
(1)
(2)
NOTE:
•
Fold up a corner of the stabilizer, to make it easier to
peel off the excess stabilizer after stitching.
•
Ironing temperatures vary depending on the kind of
adhesive stabilizer you are using.
•
S
ticky stabilizers can be used only for securing a
small piece of fabric or work that cannot be secured
in the hoop, or for securing velvet and other napped
fabric that would be permanently marked by the
hoop.
•
C
lean the bobbin holder after stitching as glue can
get stuck on it (refer to page
86).
Type Usage Property
Tear-away
Stable woven
fabrics
Made from a ber
that will tear easily.
Iron-on
Knits and all kinds
of unstable fabrics
Adhesive type
fusible with an iron.
Cut-away
Knits and all kinds
of unstable fabrics
Non-woven fabric
that does not tear.
Water
soluble
Cutwork or lace
embroidery.
Right side of
looped fabrics
such as towels
to avoid loops
coming through the
embroidery
A thin lm that will
dissolve in water.
Heat-away
Cutwork or lace
embroidery
A thin lm that will
melt away with heat.
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
