Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 22 van 112
20
Drawing Up the Bobbin Thread
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
However, you need to draw up the bobbin thread when
sewing basting stitch, etc.
1.
Press the lockout key to lockout the machine.
Turn the handwheel toward you to raise the needle.
Raise the presser foot lifter.
Remove the bobbin. Insert the bobbin into the
bobbin holder again and rethread the bobbin holder
according to the instructions on page 16, but leave
a 10 cm (4˝) tail of bobbin thread as shown.
(1) Lockout key
(2) Handwheel
(3) Presser foot lifter
(4) Bobbin thread
(5) Hook cover plate
NOTE:
Do not cut the bobbin thread with the thread cutter.
(6) Thread cutter
2.
Hold the needle thread lightly with your left hand.
(7) Needle thread
4.
Pull the bobbin thread under the presser foot.
Pass the needle thread through the eye of the
embroidery foot P.
Press the lockout key to unlock the machine.
3.
Turn the handwheel toward you to lower and raise the
needle and pick up the bobbin thread.
(2) Handwheel
1.
2.
3.
4.
(4)
(5)
(7)
(6)
(7)
(4)
(2)
(3)
(1)
(2)
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
