Janome Memory Craft 100E handleiding
Handleiding
Je bekijkt pagina 19 van 112
17
Threading the Machine
Raise the presser foot lifter.
Turn the handwheel toward you to raise the take-up lever
to the highest position.
Press the lockout key to lockout the machine.
(1) Lockout key
CAUTION:
Always make sure to press the lockout key to lockout
the machine or turn the power switch OFF before
threading the machine.
Pass the thread in order from
1.
to
6.
1.
Hold the thread with both hands and pass the thread
into the upper thread guide.
(2) Upper thread guide
2.
Be sure that the thread is pulled down under the
notch and into the space below the thread guide plate
as shown.
(3) Notch
3.
Firmly pull the thread toward you along the right
channel until the thread snaps.
Draw the thread down along the right channel and
around the bottom of the thread guide plate. Pull the
thread up along the left channel.
(4) Right channel
(5) Thread guide plate
(6) Left channel
3.
1. 2.
(1)
1.
4.
5.
6.
3.
(3)
(2)
(5)
2.
(4)
(6)
Bekijk gratis de handleiding van Janome Memory Craft 100E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 100E |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 24843 MB |
