Janome Memory Craft 1000 handleiding
Handleiding
Je bekijkt pagina 37 van 212
35
Drawing Up the Bobbin Thread
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
However, you need to draw up the bobbin thread when
sewing gathering stitches, etc.
1.
Press the lockout key to lockout the machine.
Turn the handwheel toward you to raise the needle.
Raise the presser foot lifter.
Remove the bobbin. Insert the bobbin into the
bobbin holder again and rethread the bobbin holder
according to the instructions on page 31, but leave a
10 cm (4˝) tail of bobbin thread as shown.
(1) Lockout key
(2) Bobbin thread
(3) Hook cover plate
NOTE:
Do not cut the bobbin thread with the thread cutter.
(4) Thread cutter
2.
Hold the needle thread lightly with your left hand.
(5) Needle thread
1.
2.
3.
4.
(1)
(2)
(3)
(5)
(4)
(6)
4.
Pull both threads 10 cm (4˝) under and behind the
presser foot.
3.
Press the needle up/down button twice to lower and
raise the needle and pick up the bobbin thread.
(6) Needle up/down button
Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Memory Craft 1000 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 41253 MB |
