Janome Memory Craft 1000 handleiding

212 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 212
19
Raising and Lowering the Presser Foot
(2)
(2)
(3)
(4)
(1)
(3)
(4)
Knee Lifter (optional)
The knee lifter is extremely helpful when sewing
patchwork, quilting, etc. since it allows you to handle the
fabric while your knee controls the presser foot.
Attaching the knee lifter
Match the ribs on the knee lifter with the notches in the
knee lifter socket and insert the knee lifter.
(1) Knee lifter
(2) Rib
(3) Knee lifter socket
Adjusting the knee lifter
The angle of the knee lifter can be adjusted to t the user.
Loosen the setscrew and slide the angle bar in or out to
adjust the angle of the knee lifter.
Tighten the setscrew to secure the angle bar.
(4) Setscrew
(5) Angle bar
Using the knee lifter
Push the knee lifter with your knee to easily move the
presser foot up and down.
You can control how high the foot rises by the amount of
knee pressure you exert.
(2)
(3)
(4)
(1)
(5)
CAUTION:
Do not turn the handwheel or press the needle up/
down button when the presser foot is in extra lifted
position. This may cause damage to the presser foot.
The presser foot lifter raises and lowers the presser foot.
You can raise the presser foot about 6 mm (1/) higher
than the normal up position by exerting more pressure
when lifting the presser foot lifter. This helps you to place
layers of thick fabric.
(1) Presser foot lifter
(2) Down position
(3) Up position
(4) Extra lifted position
NOTE:
If you press the start/stop button without lowering the
presser foot, the warning message appears on the
visual touch screen.
Lower the presser foot lifter and press the start/stop
button.

Bekijk gratis de handleiding van Janome Memory Craft 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkJanome
ModelMemory Craft 1000
CategorieNaaimachine
TaalNederlands
Grootte41253 MB