Janome Horizon Memory Craft 9480QCP Handleiding (164 Pagina's)

Handleiding

11

(2)

(1)

Adjusting the horizontal position of the thread cutter

switch

1.

Loosen the setscrews under the switch.

(1) Setscrew

(2) Washer

(5)

(6)

(4)

2.

Slide the switch to the left or right, and x it at the

desired position by tightening the setscrews with a

screwdriver.

1.

2.

(2)

(1)

1. 2.

(3)

Adjusting the vertical position of the thread cutter

switch

1.

Remove the setscrews and washers.

2.

Move the switch forward or backward, attach the

switch at the desired position and x it with the

setscrews and washers.

(1) Setscrew

(2) Washer

(3) Desired position

NOTE:

• To x the thread cutter switch at its lowest position,

x the setscrews into the hole (4), and then holes (5).

• Tighten the setscrews securely.

• Peel off the backing paper from the rubber sole (6)

and attach it to the bottom of the thread cutter switch

as shown.

Bekijk gratis de handleiding van Janome Horizon Memory Craft 9480QCP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.