Janome Horizon 7700 handleiding
Handleiding
Je bekijkt pagina 14 van 96
12
Setting for Dual Feed Sewing
WARNING:
Turn the power switch off before changing the presser
foot.
Attach the dual feed foot when sewing with the dual feed
device.
Attaching the dual feed foot
z Remove the needle and loosen the thumbscrew with
the screwdriver.
1 Thumbscrew
x Raise the presser foot and loosen the thumbscrew to
remove the foot holder .
2 Foot holder
c Attach the dual feed foot to the presser bar and
tighten the thumbscrew lightly. Lower the presser
foot and tighten the thumbscrew securely with the
screwdriver.
3 Dual feed foot
4Presser bar
Setting the dual feed device
z Raise the presser foot lifter to the extra lifted position.
1 Extra lifted position
x Hold the dual feed device and lower it slowly.
2 Dual feed device
c Swing the dual feed device forward to the underside of
the dual feed foot until they engage.
z
c
x
1
4
3
2
z
c
x
1
2
Bekijk gratis de handleiding van Janome Horizon 7700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | Horizon 7700 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 11361 MB |
