Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 31 van 36
29
Troubleshooting
Condition Cause Reference
The needle thread
breaks.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set properly
under the presser foot at the beginning of sewing.
6. The fabric is not drawn to the rear when the sewing has
nished.
7. The thread is either too heavy or too ne for the needle.
Pag e 11
Page 12
Page 8
Page 8
Page 12
Page 15
Page 8
The bobbin
thread breaks.
1. The bobbin thread is not threaded properly in the bobbin
case and shuttle.
2. Lint has collected in the shuttle area.
3. The bobbin is damaged and does not turn smoothly.
Pages 9, 10
Page 28
Replace the
bobbin.
The needle
breaks.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The fabric is not drawn to the rear when the sewing has
nished.
6. The needle is too ne for the fabric being sewn.
Page 8
Page 8
Page 8
Page 12
Page 15
Page 8
Skipped stitches.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work being
sewn.
4. A blue tip needle is not being used for sewing stretch, very
ne fabrics and synthetics.
5. The needle thread is not threaded properly.
6. The wrong needle is being used.
Page 8
Page 8
Page 8
Page 8
Pag e 11
Change the
needle.
Seam puckering
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
Page 12
Pag e 11
Page 8
Make stitch
shorter.
The fabric is not
feeding smoothly.
1. The feed dog is packed with lint.
2. The stitches are too ne.
Page 28
Make stitch
longer.
The machine
does not work.
1. The machine is not plugged in.
2. A thread is caught in the shuttle race.
3. The clutch is disengaged.
Page 5
Page 28
Page 10
Noisy operation
1. There is thread caught in the shuttle race.
2. Lint has built up in the shuttle or the shuttle race.
Page 28
Page 28
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
