Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 30 van 36
28
Cleaning the Bobbin Case and the Shuttle
Race
Dismantling Shuttle Race Unit
Raise the needle to its highest position and open
the hook cover.
Open the hinged latch of bobbin case and take it
out of the machine.
Open the shuttle race ring holders and remove
the shuttle race ring.
Remove the shuttle.
* Clean the shuttle race with a brush and a soft
dry cloth.
q Bobbin case
w Shuttle race ring holder
e Shuttle race ring
r Shuttle
t Shuttle race
Assembling Shuttle Race Unit
Hold the shuttle by the center pin and t it
carefully back into the shuttle race, forming a
perfect circle with the shuttle driver.
Attach the shuttle race ring making sure the
bottom pin ts into the notch.
Lock the shuttle race ring by turning the holders
back into position. Insert the bobbin case.
y Pin
u Notch
Cleaning the Feed Dog
Remove the needle and the presser foot.
Remove the needle plate setscrew and remove
the needle plate.
q Setscrew
With a brush, clean out any dust and lint clogging
the feed dog teeth.
Reset the needle plate.
CAUTION:
Turn off the power switch and/or unplug the
machine before cleaning the feed dog.
WARNING:
• Turn the power switch off and/or unplug the
machine before dismantle or cleaning the
machine.
• Do not dismantle the machine other than
as explained in this section.
CAUTION:
Do not store the machine in a high-humidity
area, near a heat radiator, or in direct sunlight.
CARE OF YOUR MACHINE
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
