Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 23 van 36
21
b
b Depress the foot control to sew a buttonhole.
The machine will sew the front bartack, left
row, back bartack and right row automatically.
Stop the machine at the ending point.
!1 Ending point
n Raise the presser foot and cut the both needle
and bobbin threads leaving 10 cm (4˝) thread
ends.
Draw the needle thread to wrong side of the
fabric by pulling the bobbin thread.
Then, knot the threads.
m Place a pin just before the bartack at each end
to prevent cutting bartacks. Cut the opening
with the seam ripper.
!2 Pin
!3 Seam ripper
• To repeat buttonhole sewing
, To repeat buttonhole sewing, turn the stitch
selector to , then back to again, as shown.
Now, simply step on the foot control to sew an
identical buttonhole.
. When the buttonhole sewing is nished, push
the buttonhole lever upward as far as it will go.
!4 Buttonhole lever
• Adjusting buttonhole stitch density
Turn the stitch length dial to the right for a coarser
density.
Turn the stitch length dial to the left for a tighter
density.
nm
!1
!2
!3
!4
,
.
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
