Janome 1522RD handleiding
Handleiding
Je bekijkt pagina 12 van 36
10
c
x
z
Winding the Bobbin
z Draw the thread from the spool.
Guide the thread around the bobbin winder
thread guide.
x Insert the thread through the hole in the bobbin
from the inside to the outside.
Put the bobbin on the bobbin winder spindle.
c Push the bobbin winder spindle to the right.
v With the free end of the thread held in your
hand, depress the foot control.
Stop the machine when it has made a few
turns, and cut the thread close to the hole in
the bobbin.
b Depress the foot control again.
When the bobbin is fully wound, stop the
machine.
Return the bobbin winder spindle to its original
position by moving the spindle to the left, and
cut the thread.
NOTE:
Return the bobbin winder spindle when the
machine stops.
Threading Bobbin Case
z Place the bobbin into the bobbin case.
Make sure the thread unwinds in the direction
of arrow.
x Pull the thread into the bobbin case slot.
c Draw the thread under the tension spring and
into the delivery eye.
* Leave about 10 cm (4˝) of free thread.
z
x
v
b
c
Bekijk gratis de handleiding van Janome 1522RD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janome |
| Model | 1522RD |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 3697 MB |
