Janitza 800-DI14 handleiding
Handleiding
Je bekijkt pagina 13 van 44
13
www.janitza.com
800-DI14 module
CAUTION
Risk of injury or damage to the basic device (mod-
ule) and/or your system due to a short circuit!
Inadequate insulation at the current measurement in-
puts of the modules with respect to the supply circuits
of the basic device can cause dangerous voltages
at the measurement input or damage to your device
(module)/system.
· Ensure reinforced or double insulation with
respect tothe supply circuits!
CAUTION
Risk of injury or damage to the meter due to high
measured currents/measured voltages at the
connections of the current transformers!
High measurement currents can cause tempera-
tures of up to 80°C (176°F) on the connections of
the current transformers
· Use wiring that is designed for an operating
temperature of at least 80°C (176°F)!
· Only use current transformers with basic insu-
lation to IEC61010-1:2010!
· Make sure that screw terminals for the current
transformer connection on the device are ade-
quately tightened!
· Comply with the information and provisions in
the documentation of your current transform-
ers!
· Ground connections present on the secondary
windings of the current transformers must be
connected to ground!
· The current transformers can be hot even after
the power supply has been switched off. Allow
the connections of the current transformers
and the connecting cables to cool down before
touching them!
Bekijk gratis de handleiding van Janitza 800-DI14, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-DI14 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5503 MB |
