Janitza 800-DI14 handleiding
Handleiding
Je bekijkt pagina 12 van 44
12
800-DI14 module
www.janitza.com
2.5 Electrically qualified personnel
To avoid bodily injury and material damage, only
electrically qualified personnel are permitted to work
on the devices and their components, modules,
assemblies, systems and current circuits who have
knowledge of:
· The national and international accident prevention
regulations.
· Safety technology standards.
· Installation, commissioning, operation, disconnec-
tion, grounding and marking of electrical equip-
ment.
· the requirements concerning personal protective
equipment.
Electrically qualified persons within the scope of the
technical safety information of all usage informa-
tion associated with the device and its components
(modules) are persons who can furnish proof of
qualification as an electrically skilled person.
WARNING
Warning against unauthorized manipulation or
improper use of the device or its components
(modules)!
Opening, dismantling or unauthorized manipulation of
the device and its components (modules) which goes
beyond the mechanical, electrical or other operating
limits indicated can lead to material damage or injury,
up to and including death.
· Only electrically qualified personnel are per-
mitted to work on the devices and their com-
ponents (modules), assemblies, systems and
current circuits.
· Always use your device or component (module)
only in the manner described in the associated
documentation.
· If there is discernible damage, send the device
or the component (module) back to the manu-
facturer!
2.6 Warranty in the event of damage
Any unauthorized tampering with or use of the
device, component or module constitutes “misuse”
and/or “negligence” under the product’s warranty
and thus voids the warranty for any possible re-
sulting damage. Note in this regard Sect. “3.3
Intended use” on p. 15.
2.7 Safety information for handling current
transformers
The field of transformer technology groups the
totality of all devices that perform the function of a
current, voltage or measuring transformer together
as sensors.
In the usage information for our devices, modules
and components, the terms current transformer,
voltage transformer or transformer all refer to
sensors.
A further distinction is made by the terms CT (cur-
rent transformer) and LP-CT (low-power current
transformer):
The term "current transformer" is used for special
transformers for the primary-proportional conversion
of currents of large magnitudes to directly measur-
able, smaller current values.
In contrast, the term "LP current transformer"
(low-power current transformer) is used for special
transformers for the primary-proportional conversion
of currents of large magnitudes to directly measur-
able, smaller voltage values (low power).
Current transformers and LP current transform-
ers provide safe galvanic isolation between the
primary circuit and the measurement circuit due to
their design and their physical operating principle.
For Janitza measurement devices, modules and
components, use only "transformers for measuring
purposes" that are suitable for the energy moni-
toring of your system! Observe the corresponding
warning notices!
Basic devices use only the term "current transform-
er" in the display for the configuration of both cur-
rent transformers and LP current transformers.
Bekijk gratis de handleiding van Janitza 800-DI14, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-DI14 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5503 MB |
