Janitza 800-CT8-LP handleiding
Handleiding
Je bekijkt pagina 18 van 56
18
800-CT8-LP module www.janitza.com
4. Mounting
CAUTION
Disregard of the installation instructions may
cause property damage or personal injury!
Disregard of the installation instructions may cause
damage to your basic device with module or destroy
it and/or may also result in personal injury.
· In addition to the installation instructions for
your module, also observe the installation
instructions for your basic device, in particular
the safety and warning information.
· Before installing modules
- Disconnect the supply of power to the system!
- Secure it against being switched on!
- Check to be sure it is de-energized!
- Ground and short circuit!
- Cover or block off adjacent live parts!
· Operate the basic device that belongs to the
800-CT8-LP module only with a supply voltage
of 24V! Observe the technical specifications in
the usage information for the basic device.
· Provide adequate air circulation in your installa-
tion environment and cooling, as needed, when
the ambient temperatures are high.
· Return defective modules to Janitza electronics
GmbH in accordance with the shipping in-
structions for air or road freight (complete with
accessories).
· All usage information is available for download
at www.janitza.com.
INFORMATION
System limits:
· The maximum bus length (JanBus) for the setup of
measurement device and module topologies can
be found in the "Technical data".
· If necessary, observe the installation manual for
transfer modules when setting up decentralized
measuring concepts.
· Before mounting, please check the number of
suitable modules for your measurement device and
module topology based on the respective usage
information.
· When installing the device/module, ensure that
there is sufficient space in the installation environ-
ment. Please also note the size of the connection
terminals used!
The scope of delivery for the 800-CT8-LP module
can be found in the Sect. “3.8 Scope of delivery” on
p. 16. More information on certain functions of the
basic device with modules can be found in the usage
information of the basic device.
INFORMATION
· The following module assembly sequence must be
observed!
· The illustrations may differ depending on the con-
nection terminals used!
Observe the installation instructions for your basic
device (e.g. check bus connector installation!) and
mount the 800-CT8-LP module with the system
de-energized as follows:
1. Press in the open bottom bolts on the rear of the
module.
4.1 Mounting module
Fig.: Module rear view
Bottom bolts
Bekijk gratis de handleiding van Janitza 800-CT8-LP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Janitza |
| Model | 800-CT8-LP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7251 MB |
